Frequently Asked Questions

FAQ

I have a register opening in the floor that measures 12 inches wide. Will your kit completely cover that opening?

Yes, the kit will cover a 12” vent, the vent is 12” x 4” with one inch flanges to allow you to screw it to the floor.

The toe kick ducting kit is just what I need but with a box sized at 3 1/4 x 14 in the floor (this used to run up the wall which is now removed and I want to redirect air to the toe kick). Can you supply?

If you have a 3 1/4 x 14 box size in the floor you would just need a flat piece of sheet metal to bring the box size down to 12” and simply screw the ducting kit over the opening.

If you need a piece of sheet metal I will supply one at no extra charge, let me know by E-Mail before you place your order and I will put it in the box.

What are the measurements for the heat register plate and the vent?

The overall size of the vent cover/register plate is 3 3/8″ x 11″1/8

The vent is a 6″ flex duct, the Toe Ductor will cover over floor vents in these sizes 4″x10 4″x12″ 6″ Round.

With standard shipping how long would it take to receive your product?

Should only take one week to receive product.

What sizes do they come in and where can you get them?

The Toe Ductor will cover supply boots sizes 4″ x10″ 4″ x 12″ or 6″ round.
Currently they are sold on our web site. ORDER HERE

We have our air ducts on the wall: can we use this kit to install the heating beneath the cabinet?

OK, please take off the wall register have a look inside.
If you have a full basement you could cut a 4″ x10″ supply boot into the floor under the cabinet and the kit will work for you.
If you have a 6” oval riser duct in the wall you can get a 6” oval 90 fitting and use the flex connection with the toe kick backer plate that’s in the kit.

What is the length of the flexible vent tubing? I’m not sure if I will need to purchase an extension without knowing this length.

24” is the length of the ducting hose. If you find that you only need a little more length just send me an E-Mail and i will cut the ducting hose longer for you, saving you the expense of the extension kit.

Do you ship to outside the U.S?

Yes we are currently shipping to Canada, we have also shipped to Australia, however additional shipping charges apply. Please contact us and we will be happy to get a shipping cost for you via UPS or USPS.

I have round floor openings under my cabinets. So will the attachment that bolts to the floor cover these openings? Also my cabinets are already installed, can I install this duct work thru the toe kick register?

Yes, the Toe Ductor will cover over a 6” round duct. You will need to remove the cabinet or cut open the floor of the cabinet to install.

If I go through the floor of the cabinet I simply cut a piece of 1/4” finished plywood to fit back in.
Please call if you have any further questions, I’m happy to help you!

I have a 4″ round — how can I modify your product to fit?

You can give me a call at 603-582-0019 if you have any questions, to answer your question, If you have a 4” round coming up threw the floor you can simply screw the Toe Ductor over it.

I just bought a house where the contractors and previous owners completely blocked off a vent underneath a cabinet. I probably wouldn’t even have noticed had the air forced its way out from under a tiny gap between the toe kick and floor. So… I’m wondering if your product can (easily) be installed after the cabinet is in place?

If the cabinet is in place you could simply cut a opening in the bottom to install, in doing so you would also get a 1/4” piece of panel plywood to simply go over the cabinet floor. The Toe Ductor fits under all standard cabinets. L12 W4 H3-1/2 Also, the Toe Ductor will cover 4×10 4×12 6”Round supply air floor boots and flanges.

Do you have an affiliate program or anything?

At this time we do not have an affiliate program but will look into this for the near future. If you are interested in distributing the Toe Ductor or ordering in bulk please contact us to see about wholesaler/contractor pricing.

Can i use my own vent to match my cabinet?

Not sure what type of vent you have but I’m sure you can find one to match your cabinet.

Will it cover a 6” Round duct

Yes, The kit will cover up to a 6” round duct, You can simply screw the Toe Ductor down over your duct.

How big is the box?

Both flanges along the 12” sides of the box have a radius curve to be able to cover up to a 6” round.

The vent duct in my kitchen floor measures 14 x 4-1/4. Is there anyway I can use your product?

Yes you can simply use a piece of sheet metal to shrink the opening to 12”
Use silicone to seal it to the floor and nail it down with roofing nails. The kit comes with sheet metal screws to fasten it to the floor.

My output under the cabinet is turned 90 deg from your arrangement.
Is a perpendicular snorkel available or will I have to bend the hose thru many cabinets? Or can a 90 deg elbow be used?

Yes a 6” flat 90 is adaptable to the kit.